Victoria Ridge

June 9, 2018. A bike-and-hike leading to an easy scramble to the summit of a scenic ridge in the Castle Wilderness.

(Post updated September 3, 2021 to reflect changes to access. Old access instructions have been deleted but time and distance information below still reflects the old route. The new route can’t be biked easily.)

  • Region: Castle Wilderness. Traditional territory of the Tsuu T’ina, Ktnuxa, and Blackfoot First Nations
  • Distance: 27.2 km round-trip
  • Total Ascent: 1075 m
  • Elevation of Objective: 2530 m
  • Total Time: 6h 30m

I’ve been eyeing up some scrambles that are rated ‘moderate’ by Nugara and Kane. Foremost on my mind lately has been Victoria Peak, in the Castle Wilderness. The thing is, I don’t want to go solo on a trip like that – it just doesn’t seem sensible. So, while I look into getting together with one or more people to scramble with, I’ve been reviewing the easier, but still interesting, targets in the scrambling books. Victoria Ridge fits the bill perfectly. The summit of the ridge is at 2530m, compared with 2587m at the summit of Victoria Peak. Unlike the scramble up Victoria Peak, the route to the ridge summit isn’t a direct uphill assault. It involves a much longer approach and follows a clear trail up a valley paralleling Pincher Creek (the actual creek, not the town). It then starts up the valley wall, through an area Joey Ambrosi’s Southern Rockies Trail Guide refers to as Thunder Basin, then continues along a long traverse and finally to a saddle on Victoria Ridge. The hiking trail ends at that point, but the summit lies a further 3.6 km southwest along the ridge, requiring roughly 400 m additional vertical gain. The initial 3.7 km of the approach along the valley is a well-maintained gravel road, making this an ideal bike-and-hike trip.

UPDATED ACCESS INFORMATION: Access for this hike has changed significantly. The initial part of the route is no longer usable as it enters private property. This is a recent change and guide books published right up to 2021 still describe the old approach, unfortunately. Access still involves using a gravel road that heads to the base of Victoria Peak, but the initial part has to be bypassed on public land. Drive south from Pincher Creek on Hwy 6 and turn at the signs for Butcher Lake and the Gas Plant. Proceed to Butcher Lake and go past. There’s a left turn onto Rge Rd 1-3A. Park near here and head up the road to the left to a well site. I’m not sure if parking is allowed at the well site or not. Click here for a Google Map with a pin on the well site. Follow a trail southwest from the well site and you’ll climb a hill under some power lines. Follow them until you reach a barbed wire fence – this is the property line. The power lines carry on over the private property, but you can go through a gate to the south (close it again after) and then follow the outside of the barbed wire fence. Then proceed as per the picture below:

Click to get a higher resolution, zoomable image.

For another perspective, check out this Facebook post from Adam Ess. He had a direct conversation with the landowner, and it seems they may be okay with people rejoining the road sooner than what I have mapped out above.

Once you’re back on the road, follow it to a a big open gravel area with a shed and a flare stack. I found the hiking trail continuing beyond the road at the northwest corner of the gravel clearing and started walking.

The trail starts out amongst the trees and is fairly flat. Pincher Creek is adjacent, and there are nice views of the creek from time-to-time. Here and there I saw some rapids and small waterfalls. Eventually the trees thin out, and a high point on Victoria Ridge is visible straight ahead. This isn’t the summit of the ridge, and the route actually traverses right to left under the visible cliffs. At the 6.6 km mark the trail departs the valley bottom and climbs steeply off to the right, heading into Thunder Basin. The trail actually remains quite distinct beyond this point, which is important to remember. Here and there a deviation from the trail was required because of deadfall trees. After that kind of deviation, I discovered that if I wasn’t on a very definite trail (there are lots of faint trails up there), I was off-track. An example of this is in the photo gallery.

A few switch-backs bring the trail significantly up in altitude, then the trail turns sharply out of the basin and traverses beneath the cliffs under the high point that was visible from the valley bottom. When viewed from across the valley, the faint trail of the traverse looks kind of precarious, but it’s not. I had no issues up to this point, but then I encountered a significant amount of snow occupying a steeply side-sloping, lightly treed area. This obscured the trail for a fairly long distance. I couldn’t see where the snow ended or where the trail came out of it. There wasn’t any significant exposure there, so a slip wouldn’t have been fatal, but it would have deposited my some distance down the slope, with a tough climb back to the route.  Moving slowly and kick-stepping I was able to continue traversing safely and found the trail on the other side.

Beyond that point, the trail gently gained elevation, slowly heading to the saddle of the ridge. 2h 36m from my car I gained the ridge and was immediately treated to an amazing view of Windsor Mountain and Castle Peak. The saddle is bordered by a rise on the northeast edge that heads up to a high-point, and a cluster of spruce trees to the southwest. The route to the summit is through these trees.

A brief exploration along the edge of the trees led to the discovery of a campfire circle and a faint trail leading beyond it. There was more snow up there, but the terrain was more favourable than on the traverse and I had no trouble continuing. Once beyond the trees, the long expanse of the ridge is visible, climbing towards what seems to be the summit. This is just a high-point along the way, though. The true summit lies beyond and can only be seen once the high-point is gained.

There was still snow beyond that point, but it was all loaded on the leeward side of the ridge. A faint trail was visible, but the route was obvious. The rest of the climb involved straightforward uphill hiking and some fun scrambling over a couple of bolder piles just below the high-point. I understand that there may be a way of circumventing the boulders to the left, but snow was covering that area. Besides, scrambling up the boulders was a lot of fun. Incidentally, there were a lot of deep crevasses between the boulders. If there were any snow cover obscuring the terrain, climbing among the boulders would be extremely dangerous.

Beyond the high-point, the sharply-peaked summit comes into view. With a bit more uphill trudging, I got to the top after 3h 41m. As I got there, a cold wind picked up and dark clouds started rolling over. The views from the top were great, but obscured somewhat by haze and clouds. To the northeast, the long line of the ridge reaches towards Victoria Peak, and a col connects to Pincher Ridge with its distinctive bulls-eye marking. To the southeast, the ridge curves back out toward the prairie heading toward Drywood Mountain. Northwest is Windsor Ridge and Windsor Mountain (from the vantage point on the summit, Windsor Mountain obscures Castle Peak). Off to the west I could see a sea of unfamiliar peaks. The weather made them look somewhat gloomy, but on a sunny day I imagine the view would be spectacular.

Because of the threatening weather, I didn’t linger on the summit. I took a few pictures, which was challenging because of the buffeting winds, and started down. No thunderstorm developed, and there was only minimal precipitation that touched me after I’d already made my way back to the valley bottom. My descent was slower than I thought it’d be because I kept stopping to take more pictures – the views are best on the descent. My very tired legs were happy to see my bike waiting for me at the end of the trail. I was able to coast most of the way back to my car.

Overall, this was a great trip and I’m surprised more people weren’t on the trail. I only encountered one other party – they were ascending the snowy traverse as I was descending. Access is very straightforward and there are no route-finding difficulties. My only worries involved the snow, so waiting until later in the season may be a good idea. The distances involved and the elevation gain lead me to classify this as a “challenging” hike. There’s easy scrambling involved in getting to the summit, but when the route is snow-free this could be avoided. Some parties would probably be just as happy to reach the saddle of the ridge and relax and explore. The trip is analogous to climbing Mount Lineham via Lineham Ridge, or Avion Ridge via Goat Lake – both in Waterton Lakes National Park. With most of Waterton shut down to hikers in 2018, this trip is worth a look.

Click on the pictures below to access full-sized images.

overview3.jpeg
Route overview. Bike = where I parked my bike; VP = summit of Victoria Peak; TB = Thunder Basin; S = saddle of Victoria Ridge; VR = summit of Victoria Ridge (OUTDATED)
overview2.jpeg
Route overview looking up the valley. Labels as for the previous pic. (OUTDATED)
IMG_8753.jpg
Elevation profile.
IMG_8643.JPG
The locked gate at the trailhead. UPDATE: While this used to be the start of the route, now the pedestrian gate is locked and there is a No Trespassing sign by the road.
IMG_8644.JPG
The info sign in the kiosk. The distances they describe are a little misleading. This sign sits at the start of the black line on their map. ’12 km return’ would only account for the red line on the map (the walking trail), but it’s 3.7 km from this sign to where the walking trail begins. UPDATE: As of Sept 2021 this sign is still there, but someone bolted a blue road sign up to partially obscure it.
To stay off the private land, you can head to this well by going left just beyond Butcher Lake. Then go to the southwest corner of the large gravel pad.
Power lines were visible overhead as I left the gravel pad. I went uphill and followed along beneath them.
The ground levelled out and eventually reached this intersection of fences. Straight ahead is the fence demarcating the private land. This is very near the southeast corner of it. I stayed outside the line of that fence by going through a gate in the fence to the left (one of those post-and-wire gates). I then followed along the outside of the fence as it went south a few meters then turned west.
The terrain descended, got pretty soggy, and I eventually got to the southwest corner of the fenced area. I followed the fence north from there, jumped a creek and avoided some deadfall, then got back out on the road. I suspect there’s a better way to get to the road if you follow the cutline west a little further (see my overview map near the top of the post)
Back to the road, beyond the private property. The fence and Texas gate mark the boundary. From here the road could be followed to its end, and the start of the walking trail to Victoria Ridge.
IMG_8649.JPG
The rather obscure start of the walking trail. Some fence-posts are visible in the brush. This is at the northwest edge of the big gravel area where the road terminates.
IMG_8652.JPG
The trail is crowded in by trees off the start. I made sure to yell every so often so I wouldn’t surprise any bears.
IMG_8654.JPG
The trail parallels the course of Pincher Creek along the valley bottom.
IMG_8656.jpg
This clearing and big boulder seemed significant.
IMG_8657.JPG
The high-point in the distance isn’t the summit, it marks the southern edge of Thunder Basin. The trail will eventually traverse beneath it.
IMG_8665.jpg
The trail eventually begins its climb out of the valley. It remains very distinct.
IMG_8744.JPG
A pleasant stream was running amongst the trees.
IMG_8746.jpg
An example of where you may lose the trail. A creek cuts across the trail, and a dead tree lies on top. Straight ahead there seems to be a continuation of the trail. That’s the wrong way, though. The trail’s actually off to the left, obscured by the deadfall, but very distinct once you see it. I initially went straight ahead here before noticing the the trail seemed fainter than before.
IMG_8666.jpg
The trail soon breaks free of the trees. Looking back the way you came you’ll have some nice views of the valley.
IMG_8667.jpg
A nice look at the steep red walls of Thunder Basin.
IMG_8668.jpg
A look ahead at the traverse beneath the cliffs. You’ll need to click and enlarge the image, but a faint horizontal trail is visible, heading into the snow on the left.
IMG_8671.jpg
On the traverse. You can see it isn’t as precarious as it seems from across the valley. In the distance, the trail enters a large area of snow. I didn’t take any pictures up there because I was concentrating on not falling.
IMG_8672.JPG
After the trail sweeps around the western aspect of the high point, it starts to look friendly again, slowly rising up towards the ridge.
IMG_8675.jpg
Upon gaining the ridge, you immediately see Windsor Mountain and Castle Peak.
IMG_8681.jpg
Continuing through the trees towards the summit, I was in another snowy area. Looking back I had nice views of Windsor Mountain, Castle Peak and Victoria Peak.
IMG_8682.jpg
Looking southwest along the ridge, a faint trail is visible. The true summit lies beyond this high point.
IMG_8684.jpg
Looking west across a picturesque valley to Windsor Ridge and Windsor Mountain. Among the red stone cliffs on the left I could see 4 tall waterfalls.
IMG_8686.jpg
A rocky step some distance short of the final climb to the high point.
IMG_8688.jpg
Approaching the high point, the boulders become much more distinct.
IMG_8691.jpg
At the bottom of the boulders. A long time ago something tall and rocky stood here.
IMG_8696.JPG
At the top of the boulders, you’re still not at the top of the high-point. It’s a short distance beyond, and not that inspiring to look at. Once you’re up there you’ll finally see the actual summit.
IMG_8697.jpg
At long last, the summit comes into view. The wind really picked up at this point and darker clouds started rolling in.
IMG_8699.jpg
Almost to the summit.
IMG_8707.jpg
Me on the summit, with the wind trying to blow my hat and sunglasses away.
IMG_8705.jpg
Summit panorama looking northeast to east. Victoria Peak is on the left, Drywood Mountain is to the right of centre. The distinctive bulls-eye on Pincher Ridge is at centre. The sharper peak beyond it is the summit of Pincher Ridge.
IMG_8704.jpg
Summit panorama looking northwest to northeast. Windsor Ridge across the valley with Windsor Mountain and Castle Peak beyond, just left of centre. Victoria Peak at the far right.
IMG_8703.jpg
Summit panorama looking southwest to west. I’m not familiar with these peaks. Windsor Ridge curves away on the right.
IMG_8715
Looking due east from the summit, into the valley south of Pincher Ridge. The bulls-eye is nicely seen here.
IMG_8726
The view as I hiked back down. The clouds broke up briefly before gathering again.
IMG_8736.jpg
More Windsor Mountain and Castle Peak.
IMG_8750.jpg
Brilliant colours down in the valley. Just after this point a little bit of rain started to fall.

6 thoughts on “Victoria Ridge

  1. Hey Par we are going up Victoria on July 28th. This is Kelly – you hiked Vimy with my wife Carrie and Jennifer P last year. We chatted briefly at Twin Butte store over dinner. Love your blog. Hope you can join us on the 28tb. This is a Castle-Crown hosted hike – I believe we hit the trail at 9AM. Cheers 🍻

    Like

Leave a Reply to par Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s